![Amtek Company](/img/default-banner.jpg)
- Видео 76
- Просмотров 287 603
Amtek Company
Добавлен 5 апр 2012
Printer-Cutter Crash Course: On Demand Webinar
In this recorded webinar, we will:
• Learn how to setup and operate your printer-cutter
• Understand the workflow common across all Roland DGA printer-cutters, from design to print/cut
• See how to print and cut graphics on a variety of media for a wide range of applications
• Hear about the new Roland BN2 Series, which offers faster print speeds, improved contour cutting, a new space-saving design, front-loading inks and media, and more
• Learn how to setup and operate your printer-cutter
• Understand the workflow common across all Roland DGA printer-cutters, from design to print/cut
• See how to print and cut graphics on a variety of media for a wide range of applications
• Hear about the new Roland BN2 Series, which offers faster print speeds, improved contour cutting, a new space-saving design, front-loading inks and media, and more
Просмотров: 87
Видео
Seating the Cutting Table Properly in a Universal VLS desktop system
Просмотров 59311 месяцев назад
Seating the Cutting Table Properly in a Universal VLS desktop system
How to reset the Z axis on a Universal Laser when the up/down buttons on the machine don’t respond
Просмотров 3,2 тыс.11 месяцев назад
How to reset the Z axis on a Universal Laser when the up/down buttons on the machine don’t respond
Measuring Laser Power | Gentec Laser Power Meter
Просмотров 86411 месяцев назад
This video will describe the process of reading laser power with a Gentec Meter and how to troubleshoot common issues with a Universal Laser from these readings. Laser Beam Alignment on VLS Desktop Units: support.amtekcompany.com/portal/en/kb/articles/laser-beam-alignment-on-a-universal-laser-systems-vls-dekstop-unit Laser Beam Alignment on ULS Platform Units: support.amtekcompany.com/portal/en...
How To "Wake Up" or Exercise a Universal Laser Tube
Просмотров 535Год назад
This video will show you how to exercise your laser tube. This is a technique you can use to attempt to wake up the laser tube if it is not outputting full power after a period of non-use. If your system is going to have lengthy downtime, this is also a technique you can use to keep the laser tube charged so it does not lose power from sitting idle. As is always the case with any laser systems,...
Roland BT 12 | Maintenance Guide
Просмотров 635Год назад
Rob and Alex show the basic procedure for maintenance on the BT-12 Direct-to-Garment Printer. Thanks to our partners: www.rolanddga.com Check us out at: www.amtekcompany.com
Roland BT 12 | Beginners Guide
Просмотров 2,1 тыс.Год назад
Rob and Alex will show the basics of preparing a job for the BT-12 Direct-To-Garment printer. Thanks to our partners: www.rolanddga.com
Roland SG2 | Maintenance Guide
Просмотров 1,9 тыс.Год назад
Rob and Alex show the maintenance procedures for the Roland SG2 Series on a SG2-300
Roland VersaWorks | Job Setup
Просмотров 1,7 тыс.Год назад
Rob and Alex show the basics of job setup in VersaWorks for use with a Printer/Cutter (SG2-300) Thanks to our partners: www.rolanddga.com
Creaform Quick Start Series - Part 3 - Rebuilding the Model in SolidWorks
Просмотров 524Год назад
This video covers rebuilding the demo model in solidworks and making edits to it. Part 1 - ruclips.net/video/gOcrMLy9jEg/видео.html Part 2 - ruclips.net/video/B5cbQIsXA90/видео.html
Creaform Quick Start Series - Part 1 - Scanning in VXScan
Просмотров 4,6 тыс.Год назад
This video covers the initial setup, calibration, scanning and alignment processes, and basic mesh cleanup using a Creaform Go!SCAN 3D scanner. Part 2 - ruclips.net/video/B5cbQIsXA90/видео.html Part 3 - ruclips.net/video/0uSRI5_5MMU/видео.html
Creaform Quick Start Series - Part 2 - Alignment and Generating Entities in VXModel
Просмотров 1,7 тыс.Год назад
This video covers aligning your scan, generating entities, and transferring those entities to SolidWorks Part 1 - ruclips.net/video/gOcrMLy9jEg/видео.html Part 3 - ruclips.net/video/0uSRI5_5MMU/видео.html
3D Scan to 3D Print Webinar | April 25, 2023
Просмотров 184Год назад
Presented by Lucas Stiim. This webinar was recorded on April 25th, 2023 by Amtek Company Inc. as a learning workshop. Lucas will show how to use a Creaform Go Spark Scanner to capture data from a broken mechanical part, reverse engineer the scan in SolidWorks and print a new functional part on our Stratasys F170. If you are interested in any of the equipment shown in the video or would like to ...
Create Stickers and Wall Decals with a Roland Printer Cutter Webinar | April 26, 2023
Просмотров 338Год назад
Presented by Corey Cohen. This webinar was recorded on April 26th, 2023 by Amtek Company Inc. as a learning workshop. Corey will show how to use a Roland Printer-Cutter and VersaWorks6 to design, print, and cut stickers or wall decals for your school or buisiness. If you are interested in any of the equipment shown in the video or would like to see more live webinars please contact info@amtekco...
Laser Cut, Etch and Mark Cylindrical Objects Webinar | April 26, 2023
Просмотров 121Год назад
Presented by Jake Shortt. This webinar was recorded on April 26th, 2023 by Amtek Company Inc. as a learning workshop. Jake will show how to utilize the rotary fixture on a Universal Laser Systems to engrave designs on cylindrical objects like water bottles. If you are interested in any of the equipment shown in the video or would like to see more live webinars please contact info@amtekcompany.c...
Adding Color to STLs Using Paint 3D | Project Ideas
Просмотров 1,6 тыс.Год назад
Adding Color to STLs Using Paint 3D | Project Ideas
Forest CNC Router Training Using Centroid Control and Vectric VCarve
Просмотров 938Год назад
Forest CNC Router Training Using Centroid Control and Vectric VCarve
Forest CNC Plasma Training Using Centroid Control and Cut2D
Просмотров 1,4 тыс.Год назад
Forest CNC Plasma Training Using Centroid Control and Cut2D
Printing to a Universal Laser Systems Laser Using Inkscape
Просмотров 2,8 тыс.2 года назад
Printing to a Universal Laser Systems Laser Using Inkscape
Initial Setup of a Universal Laser Desktop System
Просмотров 2,6 тыс.2 года назад
Initial Setup of a Universal Laser Desktop System
Unboxing a Universal Laser Desktop System
Просмотров 7912 года назад
Unboxing a Universal Laser Desktop System
Installing Universal Laser Systems Software and Drivers
Просмотров 3,8 тыс.2 года назад
Installing Universal Laser Systems Software and Drivers
Printing to a Universal Laser Systems Laser Using PowerPoint
Просмотров 6532 года назад
Printing to a Universal Laser Systems Laser Using PowerPoint
Printing to a Universal Laser System using Adobe Illustrator
Просмотров 4,5 тыс.2 года назад
Printing to a Universal Laser System using Adobe Illustrator
Printing to a Universal Laser System using Onshape
Просмотров 7262 года назад
Printing to a Universal Laser System using Onshape
The top 5 signs your program is ready for a pro grade 3D printer
Просмотров 563 года назад
The top 5 signs your program is ready for a pro grade 3D printer
Denford Software Installation Procedure
Просмотров 1,3 тыс.3 года назад
Denford Software Installation Procedure
FANUC LR-Mate Robot - Changing the Batteries and Remastering
Просмотров 28 тыс.3 года назад
FANUC LR-Mate Robot - Changing the Batteries and Remastering
How to use a rotary fixture on a Universal Laser System desktop model
Просмотров 12 тыс.3 года назад
How to use a rotary fixture on a Universal Laser System desktop model
amigo, na primeira parte que tento da um reset nos alarmes, não consigo, não funciona, pode me ajudar ?
Good morning. I complete the design in Illustrator. It just a simple cut out which is red. But once I open it in the UCP. It turns out black. And automatically starts engraving when it should be cutting. Why is that?
You'll need to make sure it's set to RBG (255 R, 0 B, 0 G) for line color. You'll then need to set the line weight to 0.003. The ULS platform will recognize this as a "hairline stroke" for cutting. I hope that helps!
Dang, Im pretty sure he says "I will stick this fine LPM up your momma" 5:27 well done Amtek you cut it in post edit and overlaid his offensive wording with some polite like "goodbye, thx for watching"
I am just curious why you remastered the robot with BLAL , not BZAL
Hi, thanks for the video. My bt12 is coming up 'ink collector is not set' but it's in the right place and I have tried changing the unit. It has always worked but after leaving it for two weeks, this message came up. I was wondering if you have any advice?
Hi, thanks for the video. My bt12 is coming up 'ink collector is not set' but it's in the right place and I have tried changing the unit. It has always worked but after leaving it for two weeks, this message came up. I was wondering if you have any advice?
Wondering if I could import a Corel draw file and just set the speed and feed settings. OR are there a bunch of steps. Making clock parts. All drawings are made by students in corel draw.
Dinfort download link❤
Que pasa si❤ el black wipe se puso para abajo😢
@Amtek Company Would it be possible to get the file to 3D print the part used in this series?
I want to draw attention to the very direct method by use of Extensions --> Export --> Win32 Vector Print , this triggers UCP interface and pushes the drawings to there directly which is massive and doesn't involve using Adobe products whatsoever. I believe this is the better workflow : ruclips.net/video/_JPb7Ts3u84/видео.html . It's advisable that you have the latest version of Inkscape
S....Pid video
thank you for this. any idea why my Bkack isnt running on my print test? Like literally ZERO black ink on the print test! Somethings not working right!
I know its late to reply since it's 5 months ago. Get yourself the jetbest cleaning solution ink bags that goes into the ink side. run a Strong cleaning until you see taht all colors are no longer running. then put back your normal ink bag and run 3 strong cleaning cycle or until you see all your colors come back,. works everytime. I have been on 4 years strong with the same printhead. no problem
Thank you so much for this great video. Incredibly helpful
Hi can we use it for medical laser units like bioletic leonardo
Wow this video is awesome! So informative!
This video is SO helpful! I've been having trouble with my Universal laser and I JUST remembered I had a Gentec laser in my storage closet
Excuse me, I have a problem with the printing sizes on the machine and I want to solve it
apnar phone number ta din kindly?
Hey, I’m using the insta 360 one x, I can’t see two videos side by side, no left and right. Are you using a newer camera? Perhaps my older camera isn’t capable of stereoscopic? Thanks in advance
"Promo sm" 🤷
I think you need a basic basic course in Fanuc… we wait for you in our Academy. ;)
Where does the ULS.cpl come from? Thank you.
You could contact Universal Laser's Support team and they should be able to get it to you: www.ulsinc.com/contact-us
Great video!
Thanks very much
I get to reboot but can't jog any axis as error message states the robot is not calibrated, any help would be great
Are you in "joint" coordinate system?
hello, I replaced my J5 on an AR mate 100ic and it moved perfectly, then I quickmastered like on this video and now it won't move, it detects collision as soon as I try to move it, what can I do?
Very informative video. Well done.
Great Video, love the editing!
How do you engrave a 20 oz tumbler on the VLS 3.5 desktop? Like a YETI brand 20 oz tumbler, the tumbler has a cone shape and it higher towards the lip vs the base.
The laser has some margin for engraving outside of the exact focal length, it's referred to as depth of focus. If you're using a 2.0 lens you should be fine, 3.0 would be better because it has a larger depth of focus but I've used the 2.0 to engrave objects with a slight slope and it worked just fine. For the yeti tumbler just make sure to focus the laser on the middle of the tumbler, that way as it hits spots higher and lower it's staying as close to that focal length as possible.
@@amtekcorey thank you for the information. I've tried it and it works.
Thanks so much this has helped a lot!
OMG You Saved me $100s / 1000's in my ability to avoid Adobe Illustrators death grip. !!! THANK YOU
Great video, I wish there were more this good.
OURS IS AN ABSOLUTE PIECE OF SH!T. THE F123 IS NOTHING BUT CONSTANT REPAIR CALLS, 1000's OF DOLLARS IN REPAIRS AND COSTS OF SIMPLE MATERIALS. RIP OFF COMPANY OF THE LOWEST SCUMBAG DEGREE.
Cutting is RGB(NOT CMYK) 255 R, G 0, B 0, A 255(or 100 depends on version) and stroke style 0.001, save as PDF and the open PDF in Adobe and Print to VLS and remember to enable "true size"
Yes, remember to only use Adobe Acrobat
Why ur copying master count to refcount ......without juz simply doing mastering with robot zero position is enough
I was thinking the same thing.
Because the visual adjustment of zero mastering is not accuracy. It just uses in the case of replacing mechanical parts
It's enough 90% of the time if your robot guy gives a shit. @@chungkhoancungtrongan6693
Wow, great video. Very helpful!
What is the cost of that license sir can you give me that i will check it
Juice
So when I go to stroke style and set it to .001 pts the line totally disappeared. I can go to view>display mode>outline I can see the outline but not the red box I drew. Also I don’t have hairline as an option. Any tips would be appreciated
Please help! I'm having similar issues. cannot get the hairline or 0.001 pt line to cut or engrave.
@@kristinlinde5827 Try 0.001 MM
They screwed up a build at InkScape. Get latest download and it fixes. I had same problem.
Use mm insted of pts
Thanks for the guide. Although after testing, I have discovered that it only works in Adobe Acrobat.
Thank you! I was having a hell of a time getting this to work!
Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience
This worked wonderfully. Thank you. I had changed the batteries 3 years ago but we haven't used this since and my boss wanted to get it up and running again.
Great Video. You saved me from hours of trial and error. Thank you!
After mastering and calibrating my robot (LR Mate 200iC w/R-30i Mate controller), the System Variable under $DMR_GRP[1] called "$REF_DONE" is FALSE ($MASTER_DONE is TRUE). Does $REF_DONE need to be set to TRUE?
I guess that means you didnt set a quickmaster reference Position. Which you should do after mastering, to be able to perform a quickmastering (for example, create a point with all axes at 0 degree. Drive the robot there. Apply quick master reference position in master menu. Now you can always quickmaster your robot by driving to zero position markings, if the mastering has been lost while there were no hardware changes (only changed cables, or disconnected them. only had empty batteries). Quickmaster is the way to go, when there were no hardware changes. Should be actually done in the videos case. A real mastering was unneccessary and ruins accuracy)
@@emanemanresuresu hello, I replaces my J5 on an AR mate 100ic and it moved perfectly, then I quikmastered like on this video and now it won't move, it detects collision as soon as I try to move it, what can I do?
@@iutarogirotto5110 Im really sorry, im afraid i cant help you much. I havent worked with fanuc robots for a while now. Does it really detect a colision or does it stop because a software endpoint switch?
@@emanemanresuresu thanks for the reply, a small wire of the servo motor brake got severed during installation, we fixed it and the problem went away, I am now trying to do a TCP calibration but can't find any material online to help me perform this procedure
I followed this and successfully mastered and recalibrated the robot, but I’m not not able to use the programs within the robot due to MOTN 023: In Singularity. Could you help?
I have had 'in singularity' errors before and I think they are caused when trying to move the robot into a position that was impossible. I think I solved this by jogging the axes back to near the home position.
You should think about if using a robot is the right thing for you, if you dont know what that means. Just google Robot and singularity. Its common across all of them.
Hanzhen harmonic gear ,robot gear reducer, over 30 years experience
what is the steps that you still have the power when you change out the batteries, how would the process be different
As long as your batteries aren't dead, you won't need to remaster. Just replace the batteries and skip the remastering part of the video.
Can you use 3rd party materials with this printer? Is there chamber and bed heating? If so, what's the max temperature?
Best video I've seen on the subject. Thanks...